You want your blinds to fit between these brackets with as little wiggle room as possible. Get down to the sixteenth if you have to! First off, make sure you purchased blinds that are plastic and not metal.
This is vital! The blinds need to say on them that they are cuttable or sizable. Get painters tape and wrap either end of the blinds as tightly as you can. Make sure they are perfectly square as well and all the blinds are lined up. Remember, make the tape as tight as you can get it. You will eventually cut along these tape lines. Using your measurements, mark exactly where you want to cut. You want to cut through the painters tape. If your tape is in the wrong spot, leave it there and add more tape.
If you cut your blinds without the tape, the saw will trash your blinds and you will cry. Note: I want my strings in the blinds to stay centered and equal on both ends, so I cut either end of my blinds to keep everything centered.
You can do this. Measure twice, cut once! Put your blinds in your chop saw miter saw , make sure you get it lined up exactly where you want it. You do not want to cut any strings. Take a deep breath. Put safety goggles on. Breathe in. Aaaannd cut.
Yes No. Free Shipping on Everything. Close Details Photos Videos. Help Center X. What is the status of my order? Click here to track the status of your order anytime. Our product production time does not include shipping time. It usually then takes another business days before your order arrives. Can a sale price be extended? You can still get today's sales deal if you want to order samples first. In fact, we strongly recommend that you order free samples prior to placing an order. If the metal bends as you cut it, bend it back into place when you've finished cutting.
Put the stiffeners back into the ends. Line up the slats so they are in an even stack. Make the ends flush.
Include the bottom rail, even though it is thicker than the slats. Wrap the blinds tightly with a rubber band at each end so they stay in an even position. If they are wood, tape the ends to keep the wood from splintering, recommends Blinds Chalet.
Measure as you did in the first section to determine how much you need to cut off of the blinds. This is to ensure that the strings that control the blinds are still evenly spaced from each side when the cuts are completed. Apply masking tape at the cut lines as in the first step so the blinds don't chip during the cutting process.
Add the cut line to the tape. Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Method 1. Measure the width of the window to determine the necessary width of the blinds. Make sure you measure the inside of the frame, where the blinds actually fit, and not the entire window frame. Measure in at least three places -- the top, bottom, and middle of the window.
Mark the smallest measurement, and cut to this. Most windows are going to have regular, even spacing, but older houses may have some variability.
If there is a change, use the smallest measurement taken. This small gap will keep your blinds from getting cut or stuck on the windowsill. Measure the blinds from the head rail and use a pencil to mark your new desired length. Use the measurement found above and mark the headrail the top of the blinds at this length. You may either cut an even amount off of both sides or cut only from the pull cord side. If the chords are on one side, you can cut only from the other side.
In many ways, only cutting one side is much easier. Cut the blind headrail using a hacksaw or tin snips. Simply start sawing to remove the headrail where you noted: Remove the metal end stiffener bracket from the side s you are cutting.
Use the hacksaw or tin snips to cut the headrail per your measured mark. File any rough edges with a metal file. However, keep in mind that the headrail edges will be covered by the mounting brackets, so a rough cut will not be visible. Replace the metal end stiffener onto the newly cut headrail. Method 2. Line up the blind slats and the bottom rail evenly. Ensure that the pull cord is fully engaged so there is no slack.
Secure the ends of the slats with rubber bands or a clamp. Make sure they are tight, but also even. You want them to line up perfectly for a perfect cut.
0コメント